Aplex-technology ACS-2210A Instrukcja Użytkownika Pobierz pdf (Strona 19)

ACS-2210A User Manual

sure that the connector pins have a one-to-one correspondence with

chassis wiring, or it may cause boot up failure.

16. BUZ1: onboard buzzer.

17. JP2: (2.0mm Pitch 2x2 Pin Header), mSATA/SATA1 Devices Master or slave

jumper setting. While using mSATA/SATA1 devices at the same time, one of the

devices must be set as Master.

JP2

Devices Master

1~2 on

3~4 off

mSATA Master

1~2 off

3~4 on

SATA1 Master

18. SATA_P1: (2.5mm Pitch 1x2 box Pin Header),an onboard 5V output

connector is reserved to provide power for SATA devices.

Pin#

Signal

Name

+DC5V

Ground

Note:

Output current of the connector must not be above 1A.

19. SATA1: (SATA 7P),,SATA Connectors, one SATA connectors are provided, with

transfer speed up to 3.0Gb/s.

20. MPCIE1: (50.95mmx30mm Socket 52Pin),mini PCIE socket, it is located at the

top, it supports mini PCI-E devices with USB2.0, SMBUS and PCI-E signal.

21. H1/H2: MPCIE1 SCREW HOLES, H1 for mini PCIE card (50.95mmx30mm Socket 52

Pin) assemble. H2 Reserve.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 71 72

Brak uwag

Aplex-technology ACS-2210A Instrukcja Użytkownika Strona 19